Safe Spotting System
Compatible with all Drycleaning Systems
This Page Also Available in:
|PROTEIN STAINS FROM HUMANS OR ANIMALS||BLOOD
|PROTEEN||A safe effective spotter for blood and all protein stains.
Apply to stain. Work with bone or brush. Flush with steam or water.
Colors that change on the alkaline side should be immediately brought back with TRIK. In cases of combination stains containing tannin and protein, treat with TRIK and follow with PROTEEN and keep alternating until stain is removed.
|TANNIN STAINS FROM THE GROUND||COFFEE
|A safe effective spotter for drinks and all tannin stains.
Apply full strength TRIK to stain without pre-wetting, flush with steam or water. If persistent, apply PROTEEN and repeat with TRIK.
Colors that change on the acid side should be immediately brought back with PROTEEN.
|WATER SOLUBLE DYE STAINS||BLUE
|Apply TRIK and follow with PROTEEN. Repeat until removed. Flush with steam or water. Dry or level as needed.
*On Reds, start with PROTEEN and follow with TRIK.
|LIGHT SOIL ON RAYONS, SILKS & OTHER FRAGILES||
|Apply SSS directly to the stain tamp or brush gently and dryclean before the SSS dries. Do not steam or flush with water.|
|SPOL||Contains both wet and dry components. Apply full strength to stain, work gently, flush with steam, and feather dry or level and reclean.|
|WATER SOLUBLE STAINS AND INSOLUBLE SOIL||PERSPIRATION
COLLAR & CUFF SOIL
GROUND IN SOIL
|SPOT-BUSTER||An excellent prespotter penetrant and wetting agent.
SPRAY & BRUSH SPOTTER: Mix 1 part SPOT-BUSTER with 4 parts water. Spray or brush on to stained area and clean in usual manner. For silks, pastels, fragiles, and whites dry or apply Stamford SSS as a leveling agent to SPOT-BUSTER treated stain and clean in usual manner.
HEAVY SOIL SPOTTER: Apply full strength.
|OIL SOLUBLE STAINS||LIPSTICK
OIL SOLUBLE DYES
OXIDIZED OIL STAINS
An all purpose liquid paint, oil, grease and lipstick remover.
Apply to stain. Work with spatula or brush. Continue as long as effective. Flush with volatile spotter or dryclean. Do not use water or steam before or after using.
|LEVELING||DAMP AREAS AFTER SPOTTING WITH WATER SOLUBLE SPOTTERS & STEAM||SSS||Use SSS as a leveling agent for use on damp areas after spotting and flushing.
Remove excess water with air and vacuum. Cover entire damp area with leveling solution. Allow 10 minutes leveling time. Dryclean in regular manner. Do not allow the area to dry prior to cleaning.